You can buy Salt Flush from the retailers listed in "Purchasing Outlets" or order it online below.

!

Salt Flush with Applicator - Mixer

PLEXICON
  • Description
Salt Flush with Applicator - Mixer
salt-flush-refill

Salt Flush Refill

PLEXICON
  • Description
Salt Flush Refill
 

Dealer Salt Flush with Applicator - Mixer

PLEXICON
  • Description
Dealers Box Salt Flush with Applicator - Mixer
salt-flush-applica_000

Outboard Engines

  • Description
Directions to Flush an Outboard Engine

Unscrew dispenser cup from the Salt Flush applicator and fill with Salt Flush concentrate. Replace the dispenser cup, taking care to ensure that the  “O” ring is seated properly.  Attach one end of the applicator to a garden hose and the other end to your flushing attachment.  Ensure the knob of the applicator is in the “OFF” position.   Turn water flow on full pressure and start engine. Bring engine up to operating temperature to ensure that the thermostat is open for Salt Flush to clean the engine cooling system.  Turn knob to the “ON” position and continue to run through the engine for 1 minute.  Turn engine off, shut off water supply.  Remove flushing attachment and applicator. Leave Salt Flush in the engine to prevent rusting and corrosion.  Use remainder of concentrate left in the dispenser bowl to rinse off boat, trailer and vehicle.